Am I A Rebellious Teenager Quiz, Who Pronounces Someone Dead At Home, Saturn In Taurus Celebrities, Articles Y

rear housing, exposed terminals and wiring on the back. What is the measured current of the TC10's RTD input? The UT52A/MDL supports 920 MHz band wireless communication. - For control relay output, alarm relay output, and power terminal. displayed value becomes 999.9C or 999.9F. I want to use it as a display. IM 05C01E81-01EN 1 Edition Oct. 2014 st Yokogawa Electric Corporation 2-9-32 Nakacho, Musashino-shi, Tokyo 180-8750 Japan internet site: www.yokogawa.com/ns Declaration of conformity and Manual retrieval TC10 is a panel mounting, Class II instrument. Search the full list . that no power is being supplied to a cable to be connected. Yokogawa Electric Corporation - TC10-L - ENGINEERING MANUAL - PAG. The UT75A temperature controllers employ an easy-to-read, 14-segment large color LCD display, along with navigation keys, thus greatly increasing the monitoring and operating capabilities. (100 to 240 VAC); Insulation voltage: 2300 V rms according to EN 61010-1; Total Accuracy: 0.5% F.S.V. Brand: YOKOGAWA . [13] AL1 and [30] AL2 will be forced to : for an absolute maximum alarm, them will be forced to the maximum input span, for an absolute minimum alarm, them will be forced to the minimum input span, for all other alarm, them will be forced to zero, [14] HAL1 and [31] HAL2 will be forced equal to the 0.5% of the input span, [35] HYS will be forced equal to 0.05 % of the input span, the CAL group will be reset [51]A.L.P, [52] A.L.O, [53] A.H.P, [54] A.H.O. It has been de- signed with compliance to the European Directives. values and the controller output instantaneous value. Relay output 2,3: 2A, 250 V AC, resistive load. When the maximum front protection (IP65) is. With thermocouple K input, can I display digits after the decimal point for the temperature? Model: digitalview ALR-1400, digitalview 417100041-3. - Modification of the product is strictly prohibited. Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals), Universal input: (TC, mV, V, mA, Pt100-Pt1000), Easy User Control for high limit or low limit, Timer (Counts the total time the setpoint is exceeded), Register to retain the maximum temperature reached, Serial communication: RS-485 Modbus (optional), IP65 front panel (when the optional panel gasket is mounted)(optional), Universal Input: TC, mV, V, mA, Pt100, Pt1000, Power consumption: 6.0 VA max. Notes: 1. The Yokogawa TC10 is a compact, all-in-one, single loop temperature controller with an easy-to-read, 3-color LED display. Such, applications include nuclear power equipment, devices using, radioactivity, railway facilities, aviation equipment, air navigation. It has been designed with compliance to the European Directives. This manual describes how to use UT55A/UT52A functions other than UT55A/UT52A's communication function and ladder sequence function . There is minimum vibrations and no impact; 4. In other words the upper display will show: ]INP. External components (like zener barriers, etc.) It has been designed with compliance to the European Directives. The short depth of the controller helps save instrument panel space. View and Download Yokogawa TC10-L instruction manual online. that no power is being supplied to a cable to be connected. There is no parameter for specifying the output direction. When installing the TC10, what is the depth in millimeters from the surface of the panel? A ladder sequence function is included as standard. - Install the power cable keeping a distance of more than 1 cm from, - The power cable is required to meet the IEC standards concerned or the. View online (36 pages) or download PDF (3 MB) YOKOGAWA TC10 User manual TC10 PDF manual download and more YOKOGAWA online manuals Notes: 1. I selected SP value transmission on TC10, but no SP value is displayed. I'm sending the temperature via PV transmission on TC10. On the TC10, I want the difference lower limit alarm to be ON 5C below the setpoint value. The polarity of the power supply has no importance; The power supply input is NOT fuse protected. 4. of use, service life and misuse are not covered by this warranty. can be downloaded (free of charge) from the web-site: The Authorised Representative for this product in the EEA is: Yokogawa Europe BV (Address: Euroweg 2 , 3825 HD Amersfoort, The Netherlands) is the Authorised Representative of. Can you issue a TC10 calibration certificate? When the upper display is showing a group and the lower display is blank, this key allows to enter in the selected group. All information. Input circuit: Current injection (135 A). Safety, Protection and Modification of the Product, - In order to protect the system controlled by this product and the, product itself, and to ensure safe operation, observe the safety, precautions described in the Engineering manual. codes: Cod1 [LMNO] for the Input Type and Control Mode selection and Cod2 [PQRS] for the Alarms and the Service Functions. Do not use it, for measurements in locations falling under Measurement Catego-, For measurements performed on circuits not, For measurements performed on circuits directly. The UT55A/UT52A also support open networks such as Ethernet communication. The relative humidity is in accordance with the instrument, The instrument can be mounted on panel with a maximum, When the maximum front protection (IP65) is desired, the optional, - Digital Input (DI2) connecting a free of. At this point the instrument restarts as for a new power ON. Pages: 30 . Nadcap AMS2750F - What's New and How to Comply? Model: TC10 - Quick Guide . voltage contact between terminals 4 and 16; - 0 to 12 V SSR Drive Output (OP4) connecting, - 12 Vdc (20 mA) transmitter power supply, connecting the 2 wire transmitter between, terminals 4 and 1; for 3 wire transmitter connect, terminal 4 to transmitter power supply input and. : 500W. Use of the in-, strument in a manner not prescribed herein may compromise the, product's functions and the protection features inherent in the, device. Looking for more information on our people, technology and solutions? What settings should I use to output PV transmission from ananalog output terminal on TC10? - Installation of protection and/or safety circuits with respect to a, lightning protector; protective equipment for the system controlled, by the product and the product itself; foolproof or failsafe design, of a process or line using the system controlled by the product or, the product itself; and/or the design and installation of other, protective and safety circuits are to be appropriately implemented, Note: To leave the Configuration session without, - This product is not designed or manufactured to be used in critical, applications that directly affect or threaten human lives. On burnout, it will be 0 mA. Line resistance: Automatic compensation up to 20W/wire with maximum error 0.1% of the input span. Looking for more information on our people, technology and solutions? Internal auxiliary PWS: 12 VDC (10%), 20 mA max.. 0/4 to 20 mA input wiring for passive transmitter using an external pws, 0/4 to 20 mA input wiring for active transmitter. We assume no liability for safety, or responsibility for, the product's quality, performance or functionality should users. TC10 4; TC10-L 4; TDLS200 3; TDLS220 2; TIO0110; TM20; TX10 3; TY500; TY700 2; U. UD350; UM330 4; UM331 2; UM33A 3; UP350 3; UP35A 3; UP550 7; . The equipment wholly protected by double insulation or, - Whenever a failure or a malfunction of the device may cause dan-, gerous situations for persons, things or animals, please remember, that the plant must be equipped with additional devices which, - We warrant that the products will be free from defects in material. 5.6 FACTORY RESET - DEFAULT PARAMETERS LOADING PROCEDURE. SKU:WE4537266 ), Panel cutout: 45[-0, +0.6] x 45[-0, +0.6] mm, (1.78[- 0.000, +0.023] x 1.78[- 0.000, +0.023] in.). condensation); 5. There's no SG terminal for wiring RS485 communication on the TC1. a TC J input is programmed). Main Features Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals) 3 Dynamic Colors Led Display Universal input: (TC, mV, V, mA, Pt100-Pt1000) 4 Set Points and alarm functions Serial communication : RS-485 Modbus PID control, ON/OFF, Auto-tuning On burnout, it will be 0 mA. : input type, Control strategy, alarms, etc.). the protection provided by this instrument may be impaired. Note: Before starting the configuration code setting, please define and write down Cod1 and Cod2 as needed: Linear 0 to 20 mA (this selection forces Out 4 = TX), Linear 4 to 20 mA (this selection forces Out 4 = TX), Note: As default, when the alarms are active, only AL1 threshold, is available at "Operator Command" level to perform non, critical tasks. 0/4 to 20 mA input wiring for passive transmitter using the auxiliary pws. Download this manual TEMPERATURE CONTROLLER Model: TC10 - Quick Guide . Model: TC10 Digital Indicating Controller with one universal input, one control output, and one selectable I/O. Can I turn off the "C" display with input other than temperature on TC10? Copyright 1994-2023 Yokogawa Electric Corporation, {{ baseCtrl.fullNavList[baseCtrl.fullNavList[baseCtrl.currentMenuDepth].parent].name }}, {{ baseCtrl.fullNavList[baseCtrl.currentMenuDepth].name }}, Special Solutions of OpreX Transformation, Visual MESA Supply Chain Scheduling (VM-SCS), Visual MESA Production Accounting (VM-PA), Cloud Inventory Management Solutions (Web*VMI), Platform for Advanced Control and Estimation (Advanced Process Control), OpreX Laboratory Information Management System, Remote Plant Performance Operation and Remote Consulting (KBC Co-Pilot Program), Predictive Maintenance of Pump Cavitation, Advanced Analytical Instrument Management System (AMADAS), FluidCom Chemical Injection Flow Controller, Real-time Plant Data Sharing Service (Web*Technician), Digital Plant Operation Intelligence (DPI) Quality Stabilization System, OpreX Data Model Broker / Design Data Validation, OpreX Customer Service Management Software, OpreX IT/OT Security Operations Center (SOC), Plant Information Management System (Exaquantum), Alarm Reporting and Analytics (Exaquantum/ARA), Integrated Production Information (Exaquantum/mPower), Power Performance Calculations (Exaquantum/PPC), Safety Function Monitoring (Exaquantum/SFM), Operator Trending Module (Exaquantum/OTM), Remote Data Synchronization (Exaquantum/RDS), Synchronous OPC DA Manager (Exaquantum/SDM), Manufacturing Data Exchange (Exaquantum/MDX), Public announcement of Yokogawas products, Single-Cell Analysis Solution Single Cellome, Distributed Temperature Sensor - Fire Detection/Fire Prevention -, Industry and Interface Libraries (Applications and Interfaces), Advanced Control Bioreactor System BR1000, ALH for FlowCam: Automated Liquid Handling, Yokogawa announcement to Windows XP users regarding Systems products, A Business Value Decision ofImpact and Significance, Yokogawa Cloud IT/OT Connectors & Integrations, TC10-L Temperature Controller Limit Control Type Engineering Manual, TC10-L Temperature Controller Limit Control Type Serial communicaiton protocol, TC10-L Temperature Controller (Limit Control Type), Model TC10-L Temperature Controller (Limit Control Type), Compact size: 48 x 48 mm (1/16 DIN), depth of 48 mm + 14 mm (terminals), Universal input: (TC, mV, V, mA, Pt100-Pt1000), Limit control function (High limit / Low limit), IP65 front panel (when the optional panel gasket is mounted)(optional). The TC10 supports easy configuration for quick start-up, and itsPID allows for overshoot andundershoot control, so the end user can maintain a direct and constant temperature or accurate flow. 3. Download Manual of YOKOGAWA TC 10-L Controller for Free or View it Online on All-Guides.com. The short depth of the controller helps save instrument panel space. There are no water or other fluids (i.e. Please, provide a T type 1A, 250 V fuse externally. Yokogawa Electric Corporation - TC10 - ENGINEERING MANUAL - PAG. What is the /GK suffix code for the TC10? Select a mounting location having the following characteristics: 2. If thePV does not exceed SP, after the conrming operation, output relay will be energized (closed) and the output (OUT) display lamp turns off . Range: 0 to 3 when [1] SenS = Linear input; 0 or 1 when [1] SenS different from linear input. Installation altitude: less than 2000 m; The instrument can be mounted on panel with a maximum, When the maximum front protection (IP65) is desired, the optional, - 0 to 12 V SSR Drive Output (OP4) connecting, - 12 Vdc (20 mA) transmitter power supply, connecting the 2 wire transmitter between, terminals 4 and 1; for 3 wire transmitter connect, terminal 4 to transmitter power supply input and. condensation); 5. I'm sending the temperature via PV transmission on TC10. condensation); 5. The. 2.56 in min. Only wire the other instruments SG terminal. All information about. The Yokogawa TC10-L limit controller is an FM-approved limit controller that can be configured either as a high limit or as a low limit controller by a user. Fsc allows the scaling of the analog input to set the maximum displayed/measured value. TC10 is a panel mounting, Class II instrument. - As a safety measure, always install a circuit breaker (an IEC 60947, compatible product, 5 A, 100 V or 220 V AC) in an easily accessible, location near the instrument. View and Download Yokogawa UT55A instruction manual online. exposed terminals and wiring on the back. The EU Declaration of Conformity and the manual of the controller. Can I turn off the "C" display with input other than temperature on TC10? (63% response when the input changes from 10% 90%). of use, service life and misuse are not covered by this warranty. The UT75A also support open networks such as Ethernet communication. future reference. This is a list of recorder and controller products that support the New Legislative Framework (NLF.). Enter your email address and check your inbox. Yokogawa Electric Corporation for this Product in the EEA. With thermocouple K input, can I display digits after the decimal point for the temperature? 18 months (a year and a half) after shipment from the factory. The conguration procedure allows to take advantage of all instrument features. Note: Before starting the configuration code setting, please define and write down Cod1 and Cod2 as needed: Linear 0 to 20 mA (this selection forces Out 4 = TX), Linear 4 to 20 mA (this selection forces Out 4 = TX), Note: As default, when the alarms are active, only AL1 threshold, is available at "Operator Command" level to perform non, critical tasks. . Allows to increase the value of the selected parameter. connected between sensor and input terminals may cause errors in measurement due to excessive and/or not balanced line resistance or possible leakage currents. For SSR, mA and V outputs if the line length is longer than 30 m use a shielded wire. A reinforced isolation must be assured by the external solid state relays. Worked Time counter is continuously increased when, Overall dimensions (L x H x D): 48 x 48 x 73 mm, This instrument is intended for permanent installation, for indoor. It also includes a ladder sequence function. Worked Time counter is continuously increased when, Overall dimensions (L x H x D): 48 x 48 x 73 mm, This instrument is intended for permanent installation, for indoor. The instrument will turn OFF all LEDs for a few seconds, then the upper display will show dFLt (default) and then all LEDs are turned ON for 2 seconds. WARNING! The Yokogawa TC10-L is an all-in-one, FM approved limit controller with an easy-to-read, 3-color LED display. when you re-congure an instrument previously used for other works or from other people or when you have made too many errors during conguration and you decided to re-congure the instrument, it is possible to restore the factory conguration. [3] SSc - Initial scale read-out for linear inputs. The UT32A-V,-C,-R is an easily configurable single-loop controller for 1/8 DIN sized. requirements of the area in which the instrument is being installed. condensation); The ambient temperature is in accordance with the operative temperature (0 to 50C); The relative humidity is in accordance with the instrument specications (20 to 90%); Do not run input wires together with power cables.